Rebel hybrid port

The Hybrid port is not a compromise but the best of both worlds, extra receiver rigidity and plenty of room to load BDL style magazines. The Rebel with Hybrid port is the perfect precision hunting rifle action, or crossover hunting/competition rifle action.

Odoo • Text and Image
  • Receiver made of pre-hardened aircraft certified 416 Stainless steel (4340 Chrome moly receiver available)
  • One piece bolt made of pre-hardened aircraft certified 4340 Chrome moly
  • Receiver barrel threads are 1.0625” X 16 T.P.I. (Rem. 700 thread dia. And pitch)
  • Receiver barrel threads available in Standard – 1.150” (Rem. 700 length) or Extended – 1.403”
  • Available with or without custom pinned scope mounts, attached with 8-40 screws (see “Pricing”)
  • Optional Mil Spec 1913 (Picatinny) scope mount. Available in 0, 10, 20, 30, 40, 50, 60 MOA. Custom made from 303 stainless steel, 4340 CM or 7075 aluminum. (add $100)
  • Optional Davidson style (Kelbly style) scope mount. Available in 0 or 20 MOA. Custom made from 303 stainless steel, 4340 CM or 7075 aluminum. (add $100)
  • Scope mounts attached with 8-40 screws and 1/8” hardened dowel pins
  • Double pinned precision recoil lug (.250” or .300” thick)
  • Integral recoil lug optional (add $50)
  • Works with hinged floorplates, detachable magazines or single shots
  • Medium length (Rem. SA) offered with AW magazine cut
  • Available in right and left hand (short actions are only available in right hand)
  • Actions available in Medium, XM, Long and XL lengths to accommodate most popular factory chamberings and extended length hand loads
  • Full round rear bridge for use with our custom scope rails or Talley mounts.
  • Rebels weigh 24 – 43 oz. depending on length and options
  • Close tolerance preserved: All material pre-hardened prior to machining to prevent changing tolerances during heat treat.
  • Receiver machined from one piece of pre-hardened 416SS.
  • Wire EDM-cut, full-length lug ways result in smooth bolt operation.
  • Bolt machined from one piece of pre-hardened 4340 chrome moly, and threaded for interchangeable knobs.
  • Primary extraction design significantly increases initial extraction and ensures smooth bolt cycling.
  • Bolt face diameters available for all standard and wildcat cartridges.
  • Extractors are M-16 type.
  • Designed for hinged floor plates, as well as detachable magazines and single shots.
  • Control-round feed available.
  • Multiple magazine well cuts available for all of today’s popular magazine types including hinged floorplates, detachable boxes or single shot.
  • Our sales team will assist you in choosing from among our 20+ options.
  • Right- and left-hand configurations available.
  • Receiver body
  • Repeater or single-shot style magazine cut
  • Bolt stop/side bolt release, spring, pin
  • One-piece bolt
  • Bolt fluting (option not available on control-round feed)
  • Extractor
  • Bolt knob
  • Firing pin/spring
  • Cocking piece
  • Bolt shroud
  • Trigger pins
  • For the Rebel only: Recoil lug/pins/.250” or .300”

MEDIUM ACTION  (Model 700™ SA Length) – $1090 or $1190 (with scope rail)
416R SS, 1.350” OD, .700” Bolt, 4340 CM, .750” Bolt Add $100

XM ACTION  – $1090 or $1190 (with scope rail)
416R SS, 1.350” OD, .700” Bolt, 4340 CM

LONG ACTION  (Model 700™ LA Length) – $1140 or $1240 (with scope rail)
416R SS, 1.350” OD, .700” Bolt, 4340 CM, .750” Bolt Add $100

XL ACTION  – $1240 or $1340 (with scope rail)
.750” Bolt Only, 416R, SS, 1.350” OD, 4340 CM

(Integral recoil lug, add $50)
(Controlled round feed with claw extractor and blade ejector, add $150)
(add $410, includes Triggertech Special trigger, 3-position safety shroud, and trigger/safety fitting)
(Extra bolt $350.00 complete with extractor, ejector, and fire control assembly)

Odoo • Text and Image
Odoo • Text and Image

The Defiance Guarantee

If you don’t like it, we’ll change it, swap it, or refund your money. We want all of our customers to be 100% satisfied with the quality of our product. We’ll even pay the return shipping.